3D printer hot bed high-power expansion MOS module.
Very powerful MOSFET to withstand higher current than normal RAMPS or other 3D Printer controller can handle.
Solves the problem of current load and too much heat bed power.

Product Parameters:

Size	52mm23mm28mm
Weight	35g
Thermistor	small size 1.25mmx2.0mm glass bead

Product Module interface :

1. J2 close to the center of the board terminal power supply 5 ~ 40V.
2. J2 close to the edge of the power supply board negative edge.

Product Output :

1. V+: Connect the positive terminal of the output power supply, and connect the load side;
2. OC: Connect the other end of the load;
3. V-: Connect the negative pole of the output power.

Pictures of Hot Bed Special MOS Tube Extension :

Product Tags:

Large Current Extension Tube Hot Bed High Power MOS Module 5 ~ 40 Volt

3D Printer Accessories

3D Printer Mainboards

3D Printer Motors

3D Printer Nozzle

3D Printer Heater Block

3D Printer Throat

3D Print Head Extruder

3D Printer Bearings

3D Printer Springs

3D Printer Limit Switch

3D Printer Heatsink

3D Printer Timing Belts

3D Printer Timing Pulley

3D Printer Heatbed

3D Printer Cooling Fan

3D printer Shock Absorber

Large Current Extension Tube Hot Bed High Power MOS Module 5 ~ 40 Volt

750 kva pad mounted transformer

high voltage flyback transformer design

abb 2500 kva transformer